Latest Gear Technology

Definition of Gear

Are cut cylindrical gear, wheel or parallel to Walatad large gear surface called pinion disk. Usually when a couple of gears in a single network is greater than the other, is the name of the gears to get a reply. The spur gears are used to transmit power from the shaft to another in the event of a parallel shaft axes.

Gear Type

These are the types of gear.

1 Mile gear:

This cut gear teeth conical empty tank. They are used in pairs to move the motion sickness and torque shaft and bevel gear at right angles (90 degrees) to each other.

2 crossed helical gears

These gears to transfer rotary motion and torque through an angle of inclined teeth and helical gear at an angle to the axis of rotation and gear.

3 worm and worm wheel

Which has one tooth worm gear teeth is called in the form of thread, screw worm wheel meshes with a worm. Helical worm wheel gears with teeth slanted to give them to deal with the treated like a worm. As well as the worm and worm wheel, helical gear transmission of rotation and movement through the rotary torque angle worm, worm wheel drive is always and never the other way round worm wheel lock mechanism if in an attempt to expel worms. Mechanism is very quiet worm.

4 million Gear

The gears are used for applications that require a very, very smooth in the high-speed rotation. Helical gears parallel inclined teeth in a small angle to the axis of rotation of them. Each age as part of a spiral or helical gears, spiral grooves cut in the middle of the hole, which can move along the splined shaft gear although it rotates with the shaft. Double helical gears to transfer torque and smooth performance with very high rotational speed of movement.

5 spiral bevel gears

When it is necessary to send a large torque and smooth over the right corner at high speed spiral bevel gears can be used. In a spiral pattern is cut spiral bevel gears on the surface of the cone. They are quieter than straight bevel gears and longer life. Spiral bevel gears in the transmission shaft of the vehicle tray.

6 internal gear

It is possible to lower the gear teeth on the face of the gear wheels. In addition, it can gear teeth cut mile ring gear. Internal gear, with the ability to upload and external spur gear better. It is safe to use, because of the teeth.

7-rack-and-pinion

Rack and pinion mechanism used to convert rotary motion into linear motion and vice verse, spur gears, sprockets mesh with the teeth and spur gear, which is located in a straight line and shelves. Gear and convert rotary motion into linear motion and vice verse, in three ways.

Differential rotation around a fixed center, causing the floor to move in a straight line.

Movement of the earth in a straight line, causing the gear to rotate around a fixed center.

If a class has been fixed and rotating the pinion gear moved in a straight line to the arm with it.

Latest Gear Technology